菱智永磁同步无齿轮曳引机，将数字变频技术、同轴传动技术及群组电脑组合控制技术充分融合，从而实现节能、减噪、易操作、运行安全舒适、节省空间及成本等诸多效果。 Lingzhi permanent magent synchronous gearless machine fully integrated digital frequency conversion technology, coaxial transmission technology and group computers combination control technology,realized effects of energy-saving,noise reduction,easy to oprate, safe and comfortable opration, spacing-saving and cost-effectiveness, and so on.
			控制系统采用全CAN串行通信，将逻辑控制与变频驱动高度集成的电梯控制技术，不但提升了产品的各项性能，而且大大降低了故障率。 The system adopted CAN serial communication, logic control and variable frequency driving, highly integrated elevator control technology, which not only enhanced the performance of the products, but also greatly reduced the failure rate.

通过分布于电梯结构中各部位的微机板，采用双32位微电脑控制系统和串行通讯网络，对整个系统实施灵活控制。在该控制系统下，故障诊断程序和后备系统完善，系统的高效性和可靠性并存，不仅从根本上保障电梯安全运行，还能使电梯未来升级更简易。 Through the arrangenment of different computers in various elevator structures, it applies double 32-digit micro computer control system and serial communication network to flexibly control the whole system. Benefiting from this control system, yhe preferment of fault diagnostic program and back-up system can be improved effectively. In addition, not only does the effectiveness and the reliability of this oprating system insure the safety of elevator running, but also realizes the probability of elevator upgrading.

采用智能模块化程序，具备故障操作自诊断和自处理能力
The smart modularized program prossesses malfunction self-diagnosis and self-treatment capacity
采用智能化负载力矩快速自动补偿，让电梯启动更平稳
The intelligent and rapid automitic compensation of load torque makes elevator stars more amoothly.

			门机变频调速系统通过编码器反馈的信息进行闭环控制，具有优良的调速特性，启动力矩大，动态响应快，专门保护和状态监视功能齐全，并具有噪音小、故障率低、调试简单、运行平稳可靠等特点。
The closed-loop control of the frequency control system of the elevator door machine is subjects to the encoder feedback, which is featured with excellent control characteristics, large starting torque, fast dynamic response, exclusive protection, complete functions of status surveillance, as well as low noise, low failure rate, easy adjustment, stable and raliable opration, etc.

			能量回馈技术（选配）：电梯在空载上行或满载下行时，势能会通过变频器转换成直流电能，利用能量回馈设备将这部分电能有效转换成交流电供其他用电设备使用，节电率15%-45%。 Energy feedback technology(optional):potential emergy will convert into direct current by frequency vhanger in the case of no-load ascending or full-load descending. Energy feedback device is able to convert this part of the energy into alternating current for theuse of other electric equipment, with power saving rate of 15%-45%.

	小区控制系统（选配）：在监控室PC机上使用监控软件，通过总线与控制系统相连，实时监控电梯运行所处楼层位置、方向位置、故障状态等情况。 District monitoring system(optional):Using the monitor software in the PC machine of monitor room, connecting with the control system throuth the bus line, monitoring the floor position, direction position ang error condition ets every time.

断电应急平层系统（选配）：针对电梯在运行中由于停电而导致的中途突然停止的状况，采用自动应急平层运行系统，及时接管电梯控制权，将电梯开动至就近平层位置，打开轿门和厅门，保障乘客安全离开。 Emergency leveling system in power failure(optional):We use emergency leveling system to prevent there would be power off when the elevator running, which can make the cabin running to the leveling position of nearest floor, then open the car door and landing door to ensure the passengers leaving in safety.